Multitest MiCon® Contactor: Advantages of Cantilever Design for MCU and ASIC Testing

Significant Improvements in Overall Equipment Efficiency (OEE) Multitest recently launched the MiCon contactor. The MiCon leverages the industry-proven Cantilever technology for the final test of Microcontrollers, Industrial DSPs and Application Specific ICs. Evaluations at customer test floors showed substantial improvements in first pass yield, life span and cleaning cycles compared to spring pin solutions. MiCon […]
The post Multitest MiCon® Contactor: Advantages of Cantilever Design for MCU and ASIC Testing appeared first on xcerra.com.
26. June 2017/by Daniela

Multitest Atlas Contactor Demonstrates Advanced Electrical and Mechanical Performance in WLCSP Testing

Atlas 0.3 mm pitch spring probe validated at customer site Multitest’s new 0.3 mm pitch Atlas contactor successfully passed a demanding customer production floor evaluation. The customer’s evaluation measures confirmed that the Atlas did reduce the customer’s cost of test while improving test yield and increasing throughput. Based on the evaluation results, the customer ordered […]
The post Multitest Atlas Contactor Demonstrates Advanced Electrical and Mechanical Performance in WLCSP Testing appeared first on xcerra.com.
26. June 2017/by Daniela

Expanding Capabilities for Temperature Testing

Multitest Soak Booster for Significant Reduction of Soaking Time Multitest recently installed the well-established tri-temp handler MT9928 with an enhanced Soak Booster option. The Soak Booster cuts down the soak time by up to 50%. Multitest is currently the only company offering this kind of advanced technology for gravity handlers. With this development Multitest is […]
The post Expanding Capabilities for Temperature Testing appeared first on xcerra.com.
29. May 2017/by Daniela

Proven RF Performance Based on Proprietary Design

Link HB Contactor Compensates for HIB Tolerances Multitest’s Link HB contactor exhibited excellent RF performance at customer sites ensuring ultra-clean high speed signals. The patent-pending design adds boardside compliance to compensate for board fabrication tolerances ensuring increased contact reliability and multisite stability. Based on the well-established offset vertical architecture of the Link contactor, Multitest has […]
The post Proven RF Performance Based on Proprietary Design appeared first on xcerra.com.
29. May 2017/by Daniela

High Volume Test for Absolute Pressure Sensors

Multitest InPressure HD System Released to Production for Automotive Application Multitest’s new InPressure HD system successfully passed all correlation tests on a customer test floor and has been released to production testing sensors for an automotive application. Multitest InPressure HD brings the field proven InPressure solution for absolute pressure test to the next level of […]
The post High Volume Test for Absolute Pressure Sensors appeared first on xcerra.com.
25. April 2017/by Daniela

Best Temperature Accuracy for Testing of High Pin Count Packages

Multitest MT9510 Pick-and-Place Handler available with additional temperature control features The Multitest MT9510 pick-and-place handler is now available with an optional active socket purge (ASP). The ASP is another feature to support the excellent temperature performance of the well-established MT9510 test handler. By applying thermal controlled air flow to the pins the ASP keeps the […]
The post Best Temperature Accuracy for Testing of High Pin Count Packages appeared first on xcerra.com.
27. March 2017/by Daniela

Multitest Atlas Contactor Brings Advanced Electrical and Mechanical Performance to WLCSP Testing

Atlas 0.3 mm pitch spring probe for reduced cost of test Multitest’s Atlas contactor with 0.3 mm pitch responds to challenging requirements in WLSCP testing. The Atlas 030 high performance WLCPS test contactors are designed to meet the electrical requirements of today’s testing environment, without sacrificing mechanical performance. Long probe life together with improved first […]
The post Multitest Atlas Contactor Brings Advanced Electrical and Mechanical Performance to WLCSP Testing appeared first on xcerra.com.
27. March 2017/by Daniela

Better Contacting Yield by Innovative Proprietary Design

Link HB Contactor Compensates for HIB tolerance Multitest launches a new design of the well-established Link contactor. The Link HB adds boardside compliance to compensate for board fabrication tolerances ensuring increased contact reliability and multisite stability. The offset vertical architecture of the Link probe is designed to support superior test yield, maximum repeatability and low […]
The post Better Contacting Yield by Innovative Proprietary Design appeared first on xcerra.com.
19. December 2016/by Daniela

Relying on Leading Test Handling Know-How: Rapid Acceptance of the New MT2168 XT Handler by the Market

Four majors IDMs decide for the MT2168 XT Multitest has received multiple orders for the new tri-temp pick and place handler, the MT2168 XT. Shortly after its official introduction to the market four global IDMs have chosen the MT2168 XT for their volume production. After comprehensive demos or onsite evaluations customers have chosen the MT2168 […]
The post Relying on Leading Test Handling Know-How: Rapid Acceptance of the New MT2168 XT Handler by the Market appeared first on xcerra.com.
19. December 2016/by Daniela

Expanding on Proven Solutions: New Sensor Test Module for Twin Axis Stimulation

Multitest has shipped new high g sensor test module for X/Z stimulation Multitest shipped a new “Shaker” high g sensor test module for the MT9928. The module allows for twin axis testing in one stimulation on the x and z axis. The module expands the MEMS/sensor test portfolio for the flexible and modular MT9928 handler […]
The post Expanding on Proven Solutions: New Sensor Test Module for Twin Axis Stimulation appeared first on xcerra.com.
21. November 2016/by Daniela

Multitest Atlas Contactor Outperforms Competition:

Significant improvements in yield and life span Multitest’s Atlas contactor with the recently launched Atlas 040 probe has demonstrated substantial advantages over a competitive solution in an onsite evaluation at a major Asian customer. Both test yield and probe life span were significantly increased and contributed to a sustainable cost of test improvement  for the […]
The post Multitest Atlas Contactor Outperforms Competition: appeared first on xcerra.com.
25. October 2016/by Daniela

Small Packages on Multitest Pick and Place Handlers

Multitest MT2168 and MT9510: Ready for Packages below 3 x 3 mm Multitest expanded the package range for both pick and place handler platforms – the MT9510 and MT2168 to devices smaller than 3 x 3 mm. The expanded package portfolios of the MT9510 and MT12168 go beyond the typical ranges of established pick and […]
The post Small Packages on Multitest Pick and Place Handlers appeared first on xcerra.com.
25. October 2016/by Daniela